Skip to content
Warm air from the vents? Get it checked 24/7 Emergency Line (770) 637-0623
HVAC Johns Creek logo
Pegboard wall of neatly hung hand tools

Seasonal tune-ups

HVAC Maintenance in Johns Creek

A spring checkup for cooling, a fall checkup for heat, and a written page that shows exactly how your equipment is doing.

Cheap Fixes Today, Fewer Big Ones Later

Breakdowns rarely come out of nowhere. A capacitor fades a little each summer. A drain line slimes up slowly. Pollen and dust build a felt blanket on the coil. The system keeps going, just longer for the same job, and that extra run time quietly costs you every month before anything actually quits. A tune-up catches those things while they are still small. Ours is hands-on. In spring, ahead of the long cooling stretch, we wash the outdoor coil, flush the condensate line, tighten electrical connections, test the capacitor, read refrigerant pressures and airflow and confirm the air coming off the coil is properly cold. In fall, before the first frost, the furnace or heat pump gets its turn: burners, igniter, flame sensor, venting, limit switches, heat strips and the defrost cycle. Each visit ends with a new filter and a written sheet: the checklist, the numbers and any part that is starting to tire. We never replace a part without asking. You simply know where things stand and can plan instead of being caught off guard. Attic units in two-story homes get extra care at the drain, since a clog up there drips straight onto a ceiling.

What a Tune-Up Includes

The list shifts with the season and the equipment. These are the backbone items.

  • Coil wash

    Condenser coil hosed clean and the evaporator coil looked over so heat moves freely.

  • Drain flush

    Slime flushed out of the condensate line, and the float switch tripped on purpose to prove it still works.

  • Electrical

    Terminals snugged, capacitor and contactor tested, motor amps read.

  • Charge and airflow

    Pressures, temperature drop and airflow logged and compared against spec.

  • Burner and safety

    Igniter, flame sensor, burners, flue and limit switches tested on gas units.

  • Heat pump extras

    Defrost, reversing valve and heat strips checked before winter.

  • Filter and findings

    A clean filter in and a written summary of every reading and suggestion.

How a Maintenance Visit Runs

  1. Baseline readings

    Measurements come first, before cleaning, so the summary shows where the system truly started.

  2. Clean and tighten

    Coils, drain and connections cleaned and snugged, and the filter changed.

  3. Run and write up

    A full cycle while we watch, then a written page with any concerns ranked by how soon they matter.

Why People Book Tune-Ups With Us

  • Numbers on paper

    Each visit logs measurements, so wear shows up as a trend before it shows up as a breakdown.

  • No hard sell

    Worn part? You get a price. Fine for another season? We say that too.

  • Your pick of days

    Weekends are open, so the visit can land on whatever day suits your household.

  • Cooling and heating checkups
  • Written findings
  • Fresh filter
  • Tidy job site

Due for a Tune-Up?

If nobody has looked at the system in a season or two, now is a smart moment. Ring us and we will find a day that fits.